FREE collection of parquet textures Model Pack by Xoio.
Have fun with them lads.
Free Parquets Model Pack By Xoio
How to create custom IES files
Everybody uses IES lights in arch viz renderings but most of the time people use templates provided by lighting manufacturers. Besides all if yo are creative and you want to know every little detail of a rendering then tou should definitly check this following tutorial. In this tutorial you will learn How to create custom IES files from Jamie Cardoso.
Free And Open Source 3D Modeling Application
Are you 3D Designer? Do you want to design 3D models? Today here we present Free And Open Source 3D Modeling Application for all lads. This 3D Modeling application is one of the best application.
Blender
Blender is the free open source 3D content creation suite, available operating systems. you can use this 3D modeling software to model, shade, animate, render and composite and create interactive 3D models. Must try and Leave a comment.
Free Industrial Storage Rack Model
Sometimes we may need small models for our project which should be adequate from every angle. Today here we present Free Industrial Storage Rack Model (Without Accessories) although its kind of small model but still it has a big impact.
Free LOFT 3D Model By Andrey Mikhalenko
Andrey Mikhalenko is one of the finest and cretaive 3D Designer. His Models are always splendid. Here we arranged all of his 3D models for the LOFT scene and packed them into single free link. All models created using 3d Studio Max, Marvelous Designer, Zbrush & Photoshop. Enjoy Lads.
Free 3D Furniture Models by Talcik
Are you looking for some amazing 3D furniture Model? Here we proudly present free offering by Juraj Talcik & Veronika Demovicova. Its not new one but still its worth a shot and quite amazing. Soon we will give you more amazing cool Stuff. Following are the Poliform. Also a download link.
Top 10 Tips For Designing Models In 3D Printing
Kacie Hultgren scenic designer who uses her 3D printer to build scale models for set designs. Following are Top 10 Tips for designing models in 3D printing.
1. 45 Degree Rule
Recall 45 degree rule, support material will be needed for overhangs that are substantial than 45 degrees or intellectual modelling tricks can be used to get the model to print.
2. Design To Avoid Using Support Material
Support material can leave horrible marks on the outside of your prints, however, support algorithms are improving all the time. Design your models so that they are 3D printable without support, in order to avoid support material which is time consuming.
3. Add Custom Supports
Mouse ears, helper disks and cones designed are into your model to help it print without the use of computer generated supports. Some of the exceptional examples of this design technique are Tony Buser’s “Mouse Eared Rocket Fincan” and Pretty SmallThings “Windsor Chairs”. Rafts can be tough to remove and also mar the bottom of your prints but depending on your software / printer configuration.
4. Know Your Printer’s Limitations
Get information about your model. Are there microscopic towers and small features that are too small to be printed in plastic on a desktop 3D printer? Thread width is an essential variable that the printer can achieve but it is often unnoticed. Thread width is defined by the diameter of your printer’s nozzle. Most printers have a 0.4mm or 0.5mm nozzle. Circle illustrated by a 3D printer is always two thread widths deep: 0.8mm thick with a 0.4mm nozzle to 1mm thick for a 0.5mm nozzle. As Kacie stated in the video, the rule of thumb is “The smallest feature you can create is double the thread width.”
5. Fit Tolerances for Interlocking Parts
Design in your fit tolerance for objects with numerous interlocking parts. Getting correct tolerances can result in different problems. Here are some Kacie’s tips for creating correct tolerances: use a 0.2mm offset for tight fit (press fit parts, connecters) and use a 0.4mm offset for lose fit (hinges, box lids). To define the right tolerance for the thing you are creating, test it yourself with your specific model.
6. Use Shells Properly
Additional shells on characteristics models like small text should not be used as it will make the details vague.
7. Optimize for Thread Width
Plan the walls of your model to be one thread width thick if you are making compliant models or need very thin characteristics. For more samples on utilizing this technique, examine Hultgren’s collection of “Flexible Inspiration” model collection on Thing verse.
8. Orient for the Best Resolution
Adjust your model for the best resolution possible for that particular model as models can be sliced into pieces if required and then reunited. Z resolution can be handled only fused-Filament Fabrication printers. Thread width determines X and Y resolution. Verify the model orientation is capable of printing those features if it has fine characteristics.
9. Orient for Stress
Verify to orient your model to minimize stress on the part by orienting the model if you want to keep prints from any disruption when force is applied. In order to make sure, the print lines are perpendicular to point of the pressure being applied.To print large models, ABS principle is applied which can be divided along the Z-axis as they cool on the build platform during printing.
10. The “Holy Grail”: Print and Place Designs
“Holy Grail” are multiple combined parts of FFF desktop machines contained in Print in place designs. Guidelines on how to confront “print in place designs”: pull design elements to platform, use bridges for captive parts and gap print carefully are mentioned in Hultgren’s tips.
Source